Use Of Motroized Rotation Stage

- Jan 16, 2020-

In industrial research and experiments, we will use the electric rotary table. Many people are confused about its use methods. Now let's introduce our products and use tutorials.

We have px110-60, px110-100, px110-150, px110-200 and other products according to the table size of the rotary table. Customers can choose according to their own needs. If they don't understand the problem, they can leave us a message.

How do we use our Motroized Rotation Stage?

Our products have matching wiring definitions. When the electric rotary table is used, it can be connected with 6, 7, 8 and 9 pins. It is very convenient to use. Many customers want to add "0" position to ensure the accuracy of the rotary table and facilitate the recording of rotation data. Let's introduce the specific operation steps below:

Motroized Rotation Stage

Step 1: find 1, 4 and 5 lines according to the picture

Motroized rotary table

Step 2: punch a 4mm Diameter Hole on the scale ring floor, and put the round magnet in

Motroized rotary table

Step 3: according to the 1, 4 and 5-pin welding wires on the nine pin jack

Motroized Rotation Stage

Step 4: install Hall switch here and glue it

Motroized Rotation Stage

Step 5: when the magnet at 0 moves near the hall switch, it can sense the origin

The above is our way of adding "0". If you have any questions, please leave a message or consult customer service ~ we will answer your questions in time.