Use And Precautions Of Electric Rotary Table

- Aug 24, 2020-

Beijing PDV Instrument Co., Ltd. (hereinafter referred to as: pideway) is an enterprise integrating optics, precision machinery, automatic control and other technologies. Today for you to introduce one of the company's main products: electric series of products - electric rotary table.

The electric rotary table series products produced by the company are only used in industrial, scientific research and experimental scenes. According to the different use needs of customers, the table diameter of the turntable produced by our company has 60mm, 100mm, 150mm, 200mm, 300mm, 400mm, 560mm, etc. many people do not know the use of the turntable very well. Next, we will introduce the use method of the turntable in detail!

Our turntable can be connected with controller or PLC in use. If you don't have a control system, you can buy it in our company!

Turntable is nine pin port wiring, standard configuration is stepper motor, according to customer's own needs can be replaced by servo motor, specific problems contact us for consultation!

Wiring description of moving port of electric mobile station

It should be noted that the current and voltage should be adjusted before power on!!!

42 stepper motor current is adjusted below 1.5A, 57 stepper motor current is adjusted below 3a

1. Connect to the positive pole of regulated power supply.

2. Far end (far away from moving end) limit, low level is effective.

3. Near end (near moving end) limit, low level is effective.

4. Power ground.

5. Photoelectric switch zero output, low level effective.

6. Move the positive end of phase a winding (a +).

7. Move the positive end of phase a winding (a -).

8. Move the positive end of phase B winding (B +).

9. Move the positive end of phase B winding (B -).

You want to know more about our electric turntable related problems, you can contact us at any time!