PX110-100 Motorized Rotation Stage

- May 14, 2020-

Model: px110-100

Origin: China

Electric rotary table, electric rotary table, electric rotary table, electric rotary table, electric rotary table

characteristic

Product features:

The standard stepping motor can be equipped with kz-100 or tc-55 series motion controller to realize automatic control

The rotating shaft system is precisely processed by multi-channel technology, with high matching accuracy, large bearing capacity and long service life

The worm gear and worm structure with precise research and matching are used for comfortable movement, which can rotate forward and backward with small air return

The air return gap caused by long-term use can be adjusted by the ingenious design of the air return structure

The special structure design ensures the very low end jump and eccentricity of the rotary table, making the rotary movement more stable

The center through-hole and the rotation center of the rotary table have strict coaxiality requirements, and the center hole diameter of the rotary table has strict matching tolerance restrictions, which is convenient for customers to make precise positioning

The scale circle around the table is a laser scribed scale, which can rotate relative to the table to facilitate initial positioning and reading

The stepper motor and worm are connected by imported high-quality elastic coupling, the transmission is synchronous, the depolarization performance is good, the eccentric disturbance is greatly reduced and the noise is small.

The electric rotary table can be used either horizontally or vertically, and can be combined with other types of tables to form multi-dimensional electric adjustment table

Can add limit function, add initial zero position, change servo motor, add rotary encoder, accept product reform and customization.

Motorized Rotation Stage

* three phase stepping motor or servo motor can be replaced to increase the rotating speed and torque of the rotating table

Structural angle range 360 degrees

Table size: φ 100mm

Transmission ratio: 180:1 or 90:1

Driving structure: worm gear structure

Guide rail type: Bearing

Step motor (1.8 °): 42byg

Main material: aluminum alloy

Surface treatment: Black anodizing

Center load: 45kg

Weight: 2kg

Speed: 25 ° / sec

Repeat positioning accuracy: 0.005 ° = 18 ''

Jue positioning accuracy: 0.01 ° = 36 ''

End hop accuracy: 15 μ M

Empty return: 0.005 ° = 18 ''

Eccentricity: 5 μ M

Step lost: 0.005 ° = 18 ''

Parallelism: 80 μ M