Operating Principle And Maintenance Of Optical Platform

- May 15, 2019-

Operating Principle and Maintenance of Optical Platform

Working principle

Optical platforms pursue level, first of all, when processing the entire mesa is extremely flat. After that, the countertop is placed on four connected airbags to ensure the level of the countertop. The table is covered with square-arranged engineering threaded holes, which can be used to fix optical elements. In this way, when you complete the construction of optical equipment, the system will not be subject to external disturbances. Even if the table is pressed, it will automatically return to the level because of the airbag.

Maintenance and maintenance of optical platform instruments:

  1. All optical glass devices should be kept clean to avoid all kinds of pollution. If dust falls on, it can be cleaned with Ear Wash ball and soft brush, and wiped with fine velvet cloth. The fingerprints and stains should be erased by soaking a small amount of ethanol-ether mixture (7:3) with degreased cotton. Special protection should be strengthened in wet season.

  2. A small amount of lubricating oil can be added to the rotating and sliding parts of the mechanical structure. A very thin layer of oil should be applied on the platform to protect the surface.