Introduction of electric displacement table:
Motorized Translation Stage, referred to as electric displacement platform, is widely used in scientific research, laser application, automatic measurement and testing equipment, industrial automation and other fields, as well as the realization of vacuum, pollution, asepsis, radiation and other environmental automatic displacement control.
Electric displacement station system usually consists of three parts: displacement station, drive motor, controller. The driving motor and controller mainly determine the driving torque, plus or minus speed, signal processing, using functions (such as scanning, circular interpolation) and other performance parameters. With the improvement of motor control technology, in addition to the mechanical parts of the electric shifting table, the motor and controller also affect the positioning accuracy of the electric shifting table to a large extent. The displacement platform is the core of the whole displacement system, and the main technical indicators of the system, such as: displacement accuracy, travel, straightness, load, stability, adaptability to the environment, size, etc., are all determined by it.
Electric Translating Platform is widely used in scientific research, laser application, automatic measurement and testing equipment, industrial automation and other fields; And the realization of vacuum, pollution, asepsis, radiation and other environmental displacement control, what should be paid attention in the using of electric displacement platform?
1. Use the two fixing screw holes at the bottom or mounting bracket to install directly or add protection or other mechanical use according to the needs of site and machine installation space facilities.
2. China Electric Lifting Platform supplier shares that attention shall be paid to the drawing rope outlet Angle during installation, that is, try to make the drawing rope slide in a straight line from the outlet to the moving part of the mechanism, and try to keep the Angle deviation as small as possible to ensure the measuring accuracy and the life of the cable. When long stroke is installed vertically, it is recommended to install the pull rope ruler body in the lower part and pull rope upward.
3. Traction rope itself is stainless steel coated with fluorine layer, do not let it by external force, but by burning, cutting, impact: excessive debris, dust or enough to destroy the wire rope goods stored in the internal pulley or outlet will cause wire damage, leading to the failure of operation.
4. It is not installed in front of fixed seat or work table. It is forbidden to take out the steel cable by hand or other products and let it spring back instantly. This action will cause the steel cable to break, harming the body structure and personal safety.
5. If it is used for non-straight motion mechanism, please install appropriate pulley to operate and bundle the curve motion in straight motion. For use in harsh environment or special occasions, please install protection mechanism by yourself.