Features:
1. Thin structure, can be installed in a narrow position.
2. Tighten the fixing block with screws.
3. It can be used when the precision is not very good.
ProductParameter
subject | guiding axle | rotary knob | feed screw | |||
texture | surface treatment | texture | hardness | surface treatment | texture | texture |
AI6063 | Black anodizing | HRC56 | durionise | 0Cr18Ni9(304) stainless stell | 0Cr18Ni9(304) stainless stell | 0Cr18Ni9(304) stainless stell |
model | Sliding table | The largest travel | Z | B | Load tolerance level (N) | Weight (g) |
PT20-16 | 20×20 | 16 | 8 | 66 | 19.6 | 60 |
PT20-21 | 21 | 10.5 | 71 | 19.6 | 70 |
For the size of the fixed installation hole of the sliding table, please refer to the size figure 1 of the bottom plate
