Three prevention conditions for metallographic microscope

- Mar 31, 2020-

Metallographic microscope is a high-tech product developed by combining optical microscope technology, photoelectric conversion technology and computer image processing technology. It is very convenient to observe metallographic image on computer, so as to analyze and grade metallographic atlas, output and print pictures. In order to prolong the life of metallographic microscope, the following points should be paid attention to when using it:

If conditions permit, it is suggested that your laboratory should have three prevention conditions: shockproof, moistureproof and dustproof; power supply: 220V ± 10%, 50Hz; temperature: 0 ° C-40 ° C. When focusing, pay attention not to make the objective contact the sample, so as to avoid scratching the objective. When the machine is not used, do not cover the dust cover immediately. Cover it after cooling. Pay attention to fire protection.

Second, the brightness adjustment must not be large or small, nor too bright, which will affect the service life of the bulb, but also damage the vision. All switches should be light.

Metallographic microscope is a high-tech product developed by combining optical microscope technology, photoelectric conversion technology and computer image processing technology. It is very convenient to observe metallographic image on computer, so as to analyze and grade metallographic atlas, output and print pictures. extend

The service life of metallographic microscope needs to pay attention to the following points in use:

If conditions permit, it is suggested that your laboratory should have three prevention conditions: shockproof, moistureproof and dustproof; power supply: 220V ± 10%, 50Hz; temperature: 0 ° C-40 ° C. When focusing, pay attention not to make the objective contact the sample, so as to avoid scratching the objective. When the machine is not used, do not cover the dust cover immediately. Cover it after cooling. Pay attention to fire protection.

Second, the brightness adjustment must not be large or small, nor too bright, which will affect the service life of the bulb, but also damage the vision. All (function) switches should be light and in place. Turn the brightness down to Zui. When the power is off and not in use, adjust the objective lens to Zui low state through focusing mechanism. Non professionals should not adjust the lighting system to avoid affecting the imaging quality.

Third, do not switch the objective lens when the center of the pad hole of the stage is far away from the center of the objective lens, so as to avoid scratching the objective lens. When replacing the halogen lamp, pay attention to the high temperature to avoid burns; pay attention not to touch the glass body of the halogen lamp directly by hand. In place. Turn the brightness down to Zui. When the power is off and not in use, adjust the objective lens to Zui low state through focusing mechanism. Non professionals should not adjust the lighting system to avoid affecting the imaging quality.

Fourth, do not switch the objective lens when the center of the pad hole of the stage is far away from the center of the objective lens, so as to avoid scratching the objective lens. When replacing the halogen lamp, pay attention to the high temperature to avoid burns; pay attention not to touch the glass body of the halogen lamp directly by hand.