Motorized Rotation Strage PT-GS200

- Nov 17, 2020-

Motorized Rotation Strage Optical Rotating Platform Motorized Rotary Stage PT-GS200

1   Item Number: PT-GS200

2   Rotation Range: 360° of Continuous Rotation

3   Diameter of Platform: Ø200mm

4   Drive Mechanism: Worm Gear

5   Worm Gear Ratio: 45∶1

6   Stepper Motor (1.8°): 57BYG - Stepping  Motor with 2-Phases & 1.8° of Step Angle

7   Material – Finish: Aluminum Alloy - Black-Anodized

8   Load Capacity: 50Kgs

9  Weight: 7.5kgs

Motorized Rotation Strage Optical Rotating Platform Motorized Rotary Stage PT-GS200 Product structure drawing

Knowledge of the optical table 

An optical table is a vibration control platform that is used to support systems used for laser- and optics-related experiments, engineering and manufacturing. The surfaces of these tables are designed to be very rigid with minimum deflection so that the alignment of optical elements remains stable over time.Many optical systems require that vibration of optical elements be kept small. As a result, optical tables are typically very heavy and incorporate vibration isolation and damping features in their structure. Many use pneumatic isolators that act as mechanical low-pass filters, reducing the ability of vibrations in the floor to cause vibrations in the tabletop.

Stepper motor

In some automated stages a stepper motor may be used in place of, or in addition to a manual knob. A stepper motor moves in fixed increments called steps. In this sense it behaves very much like an indexed knob. If the lead screw pitch is 0.5 mm and the stepper motor has 200 steps per revolution (as is common), then each revolution of the motor will result in 0.5 mm of linear motion of the stage platform, and each step will result in 0.0025 mm of linear motion.

our service

Based on many years of practical experience, we will be in accordance with the specific needs of customers, integrate into our design philosophy, to provide customers with acomprehensive system solutions.

We will use our long-term product and application experience, to provide customers with the fastest, most professional pre-sales and after-sales service.

As the manufacturer of this category of products, based on our strong technical support and production capacity, we are committed to providing one-stop service to customers, to provide customers with a comprehensive solution.